A substance represented by a single Chemical Abstract Service Registry Number (CAS#). https://healthymaterialslab.org/tool-guides/hml-resources

A refrigerating machine composed of a compressor, a condenser, and an evaporator, used to transfer heat from one fluid to another.

A framed enclosed space around a flue pipe or a channel in a wall, or through a ceiling for something to lie in or pass through. A recessed area in a wall for holding pipes and conduit that passes vertically between floors.

A manufactured wood panel made out of 1"- 2" wood chips and glue. Often used as a substitute for plywood in the exterior wall and roof sheathing. Also called OSB (Oriented Strand Board) or wafer board.

A line made by snapping a taut string or cord dusted with chalk. Used for alignment purposes. Straight working line made by snapping a chalked cord stretched between two points, transferring chalk to work surface.

A process for strengthening glass that involves immersing the glass in a molten salt bath.

To install fiberglass insulation around all exterior door and window frames, wall corners, and small gaps in the exterior wall.

A written document which modifies the plans and specifications and/or the price of the construction Contract.

Interior trim material installed about 3-4 feet up the wall, horizontally.

Chlorinated Polyethylene (CPE) and Chlorosulfonated Polyethylene (CSPE) are Persistent Organic Pollutant Source Materials: due to their carbon-chlorine bases, these products contribute to the creation of dioxins and furans at different points in their life cycle (often manufacturing and/or disposal). According to the World Health Organization, dioxins are some of the most potent toxins known to humans, with no known safe limit for exposure and a strong propensity for bioaccumulation. In addition, dioxins are highly persistent in the environment. Similarly, furans accumulate in animal fat, concentrating as they travel up the food chain. Non-chlorinated polyethylene products are readily available in many product categories. https://healthymaterialslab.org/tool-guides/hml-resources

A horizontal or inclined structural member forming the lower edge of a truss.

Chloroprene is a Persistent Organic Pollutant Source Material. Due to its carbonchlorine base, it contributes to the creation of dioxins at different points in its life cycle (often manufacturing and/or disposal). According to the World Health Organization, dioxins are some of the most potent toxins known to humans, with no known safe limit for exposure and a strong propensity for bioaccumulation. In addition, dioxins are highly persistent in the environment. https://healthymaterialslab.org/tool-guides/hml-resources

A horizontal or inclined structural member forming the top edge of a truss.

According to USEPA, the depletion of the Earth’s protective ozone layer by chlorofluorocarbons (or CFCs) is responsible for an increased incidence of skin cancer, cataracts, impairment of human immune systems, and damage to wildlife. CFCs have been banned from production in the United States since 1995. https://healthymaterialslab.org/tool-guides/hml-resources

Although chromium is a naturally occurring element and chromium III (trivalent chrome) is an essential nutrient, chromium VI (hexavalent chrome) can cause serious health issues, especially for factory workers who can inhale or ingest it during manufacturing. There has been concern about it in drinking water and, lacking EPA maximum allowable levels, the State of California set a public health goal for it. Chromium VI is used primarily for chrome plating of metals for decorative or protective finishes, making stainless steel, leather tanning, anti-corrosive agents for paints, and in textile dyes and pigments. Long-term or high-level exposure through inhalation can cause nasal irritation and ulcers, breathing problems, and nasal and lung cancer in unprotected workers. Ingestion can cause anemia and/or stomach tumors. Skin contact can cause skin ulcers and allergic reactions. https://healthymaterialslab.org/tool-guides/hml-resources

The flow or movement of people, goods, vehicles, etc., from place to place.

A device which looks like a switch and is usually located inside the electrical breaker panel or circuit breaker box. It is designed to (1) shut of the power to portions or the entire house and (2) to limit the amount of power flowing through a circuit (measured in amperes). 110 volt household circuits require a fuse or circuit breaker with a rating of 15 or a maximum of 20 amps. 220 volt circuits may be designed for higher amperage loads e.g. a hot water heater may be designed for a 30 amp load and would therefore need a 30 amp fuse or breaker. An electrical device used to open and close a circuit by nonautomatic means or to open a circuit by automatic means at a predetermined overcurrent without damage to itself.

A nonload-bearing exterior wall enclosing a building. It may be brick, aluminum, steel, bronze, plastic, glass, stone, or other acceptable material.

Chlorobenzene is used primarily as a solvent, a degreaser for auto parts, and a chemical intermediary for making other chemicals, so exposures is primarily a risk to workers making or using it. Most exposures are through inhalation of fumes. Shortterm exposure can cause headaches, sleepiness, nausea, numbness, muscle spasms, and in extreme cases, unconsciousness. Chronic (long-term) exposure can cause increased signs of neurotoxicity (numbness, etc.) and irritation of the upper respiratory tract. In animals, chronic exposure has also caused kidney and liver damage. Chlorobenzene is broken down by sun and bacteria in the environment and does not accumulate in the food chain. https://healthymaterialslab.org/tool-guides/hml-resources

The path of electrical flow from a power source through an outlet and back to ground.