A product made by bonding layers of wood or other material to a wood substrate.

A fast-drying clear or pigmented coating that dries by solvent evaporation.

Program allowing a manufacturer to place Underwriters Laboratories Inc. labels on his products that have met UL requirements. A UL representative visits the manufacturing location to obtain samples of the products for testing by UL. In some cases, samples are also purchased on the open market for testing. The public is thereby assured that products bearing the UL label continually meet UL specifications.

A material made by bonding several layers of material.

A structural lumber manufactured from wood veneers so that the grain of all veneers runs parallel to the axis of the member.

Glass panels that have outer layers of glass laminated to an inner layer of transparent plastic.

Shingles that have added dimensionality because of extra layers or tabs, giving a shake-like appearance. May also be called "architectural shingles" or "three-dimensional shingles."

The area 18 inches (5490 mm) above or below the landing floor.

Heat involved with the action of changing the state of a substance, such as changing water to steam.

- A beveled metal tongue operated by a spring-loaded knob or lever. The tongue's bevel lets you close the door and engage the locking mechanism, if any, without using a key. Contrasts with dead bolt.

A platform between flights of stairs or at the termination of a flight of stairs. Often used when stairs change direction. Normally no less than 3 ft. X 3 ft. square.

To cover the surface of one shingle or roll with another.

A general term used to describe the source of artificial light. Often called a bulb or tube.

- Bonding together two or more layers of materials.

The underground trench and related services (i.e., electric, gas, telephone, sewer and water lines) that will be buried within the trench.

A water-based coating, such as styrene, butadiene, acrylic, and polyvinyl acetate.