A horizontal angle measured clockwise from North or South.

Carpet formed by weaving on a loom that inserts each tuft of pile individually into the backing.

The world's most popular CAD (computer-aided drafting) software product for the personal computer by Autodesk, Inc. Anything that can be drawn on a drawing board can be drawn by AutoCAD. See also Revit.

A girder arranged parallel to the main girder for supporting the platform motor base, operator’s cab, control panels, etc., to reduce the torsional forces that such load would otherwise impose on the main crane girder.

A code term involving the permitted practice of holding a fire door in the open position providing the door closes upon detection. Generally the detection must be from the presence of visible or invisible particles of combustion. Fusible links are not usually considered acceptable because of slower response time. Any listed closer can be used in combination with an electromagnetic holder and a photo electric or ionization type smoke detector. Labeled or listed spring hinges could be used as well as hydraulic door closers. Some special applications of swinging, sliding and rolling fire doors primarily in industrial applications are permitted to be used with fusible links, weights and pulleys. Later product introductions are more sophisticated and provide more flexibility for building operation. These are hydraulic door closers incorporating hold open mechanisms allowing the door to be held open in many degrees of opening positions. The most recent product introduction along these lines is the so-called "swing free" unit. Instead of using a hold open mechanism, the energy of the closer is negated and the door is allowed to be operated as if it were not equipped with a closer. Upon detection of visible or invisible particles of combustion, the closing mechanism engages and the closer causes the door to return to the closed and latched position. These automatic closing arrangements are fail safe in that upon power failure, the door closes. All are listed by a nationally recognized independent testing laboratory and are under an in-plant follow-up inspection service.

A high-pressure steam room that rapidly cures green concrete units.

- A welding procedure using a machine to make a weld.

The combination of door, operator and controls constituting the system.

The power mechanism causing the opening and closing of a door upon receipt of a actuating signal.

All specified dynamic live loads other than the basic design loads which the building must safely withstand, such as cranes, material handling systems, machinery, elevators, vehicles, and impact loads.

A crane which when activated operates through a preset series of cycles.

A lock having a latch bolt or a dead bolt operated by a key or a thumb turn or both. This lock is often used in addition to another lock, which may or may not be key operated but which has a latch bolt operated by knobs or levers.

- A load whose line of action passes through the centroid of the member's cross-sectional area and is perpendicular to the plane of the section. A longitudinal load that acts at the centroid of a member and perpendicular to it's cross section.

Hinged at the top and swinging out at the bottom, operated by a cranking mechanism. Usually rectangular, and wider than they are long. A window that pivots near the top edge of the sash and projects toward the exterior.

- An axial force causing tension in a member.

- A non-profit organization whose major goal is to advance the science, technology, and application of welding and related joining disciplines.

- An axial force causing compression in a member.

) - An organization established in 1984 to bridge the gap between the findings of basic welding research and the needs of the industry.

An architectural projection that provides weather protection, identity or decoration and is wholly sup ported by the building to which it is attached. An awning is comprised of a light weight, rigid skeleton structure over which a covering is attached.

- A force tending to elongate or shorten a member.

- The acceptance of a bid or negotiated proposal by an owner.

A structural member designed to transfer a axial tension or compression load only.

This is the term used for paving for roads and driveways. Not "Asphalt" or "Bituminous" Concrete.

- A group of mutually dependent and compatible components or subassemblies of components.

A tax levied on a property, or a value placed on the worth of a property.

Allows a buyer to assume responsibility for an existing loan instead of getting a new loan.

- For any rectangular configuration, the ratio of the lengths of the sides.

Most native asphalt is a residue from evaporated petroleum. It is insoluble in water but soluble in gasoline and melts when heated. Used widely in building for waterproofing roof coverings of many types, exterior wall coverings, flooring tile, and the like. Dark brown to black hydro-carbon solids or semisolids having bituminous constituents that gradually liquify when heated.

- An organization which has developed over 10,000 technical standards which are used by industries worldwide.

A substance that causes new cases of asthma. https://healthymaterialslab.org/tool-guides/hml-resources